Plastic small sealing machine is suitable for aluminum foil bags, plastic bags, composite bags for medicine, pesticide, food, daily chemical, lubricant, meat products, seafood, fruits and vegetables, pickles, chilled meat, pharmaceutical products, hardware components, medical equipment and other occupations. Aspiring sealing machinery.

This sealing machine is designed and manufactured based on advanced models at home and abroad, and has the function of vertical and horizontal sealing. Suitable for sealing and bag-making of all plastic films. It is an aspiring sealing device for food factories, cosmetics factories, pharmaceutical factories and other units. It can be operated in succession, and can also print the date and batch number according to user needs.  Suitable for assembly line operations.

Generally, the sealing machine is composed of a frame, a deceleration and speed-adjusting transmission organization, a sealing and printing organization, a conveying equipment, and an electrical and electronic control system.

After the power is turned on, each organization starts to work. After the electric heating element is energized, it heats the upper and lower heating blocks, and adjusts the temperature to the required temperature through the temperature control system. The embossing wheel rotates, and the cooling system starts to cool as needed. And adjust the speed to the required speed by the speed regulation equipment.

When the package containing the article is placed on the conveyor belt, the sealing portion of the bag is automatically fed between the two sealing belts in the operation and brought into the heating zone. The heat of the heating block is transmitted to the sealing portion of the bag through the sealing belt. The film is heat-melted and softened, and then passes through the cooling zone to reduce the surface temperature of the film appropriately, and then is rolled by the knurling wheel (or printing wheel) to make the upper and lower plastic films of the sealing part adhere and press out a net pattern (or printed logo) ), And then the sealed packaging bag is sent out of the machine by the guide rubber belt and the conveyor belt to complete the sealing operation.

Regularly clean the surface of the machine, the bottom plate and the lower mold slide, the groove, the upper mold inner pressure plate and the positioning rod (Note: the power must be turned off and the room temperature recovered).  The lower mold slide, pressure rod bearing, eccentric wheel, guide post, guide rail and other transmission parts are regularly buttered to ensure the performance of the machine. How to clean the tooth knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, stop filling, and then push the lower mold slide into place, press the upper mold down, press To the lowest point, let the knife soak for several minutes until the cleaning stops and repeat several times.